Slabs for Local Fabrication
Select the slab design and thickness, then complete cutting, edge finishing and openings at the destination. Full cutting layouts and usable slab yield are important.
Explore kitchen slabs →We supply sintered stone countertop slabs and custom kitchen worktop options for fabricators, distributors and project buyers. Our current countertop collection includes 12 mm, 15 mm and 20 mm thickness options on selected models, with eased, laminated and mitred edge configurations for different countertop designs.
For a fitted kitchen, the final specification also depends on sink and hob openings, joints, overhang support, backsplash details and the approved fabrication drawing.
Countertop Formats
Kitchen countertop procurement can involve stock slabs for local fabrication or finished components made to approved drawings. The right purchasing format depends on who will cut the material, prepare openings, finish the edges and complete the installation.
Select the slab design and thickness, then complete cutting, edge finishing and openings at the destination. Full cutting layouts and usable slab yield are important.
Explore kitchen slabs →Finished countertop components are specified by their dimensions, edges, sink and hob cutouts, installation details and approved fabrication drawings.
View countertop products →Waterfall panels and exposed profiles may require coordinated body colour, face alignment and edge sampling. Internal vein continuity varies by model.
Explore full body slabs →Technical Selection
Selected countertop products list 12 mm, 15 mm and 20 mm thickness options. The 800 × 2600 mm Carrara Gold DFA2615ST2039 is separately listed as a 15 mm slab. Thickness and finish must therefore be checked at product-code level rather than assumed for every design.
| Specification | Published Options / Requirements | Project Decision |
|---|---|---|
| Material Format | Kitchen slabs and custom countertop components | Confirm whether local or supplier-side fabrication will be required. |
| Thickness | 12 / 15 / 20 mm on selected countertop products | Review support, openings, edge profiles and the installation specification. |
| Slab Size | 800 × 2600 mm on model DFA2615ST2039; other dimensions depend on product. | Submit finished lengths, depths and cutout positions for yield planning. |
| Edge Profile | Eased, flat laminated and mitred edges listed for selected worktops | Confirm drawing, finished profile thickness, exposed faces and joint appearance. |
| Finish | Glossy and matte on selected designs; other finishes are model-specific. | Approve the actual sample for the intended kitchen environment. |
| Openings | Sink, hob and faucet cutouts according to the approved component drawing | Verify appliance templates, corner details and required clearances. |
Fabrication Planning
Countertop fabrication should be defined before the final material and quantity are approved. Openings, supports and joints can affect the cutting layout, the number of slabs required and the finished appearance.
Record countertop lengths, depths, island panels and backsplash dimensions. Mark overhangs and any non-standard shapes.
Use the appliance manufacturer's current installation drawing. Confirm sink mounting style, hob opening, faucet holes and all corner and edge clearances.
Define eased, laminated or mitred edges as applicable. Review seam locations, pattern direction and matching requirements for waterfall panels.
Confirm cabinet support, spans, openings, overhangs, substrate condition and the proposed fixing method with the project fabricator or installer.
Check the physical finish, colour variation, vein layout and any exposed edge detail against the project specification.
Confirm component identification, quantities, drawing revisions and packing arrangement before production or shipment.
Explore our stone processing information for additional fabrication-related products and processes.
Current Product Examples
Colour and appearance are only part of the specification. Match each model with its published options, then confirm the required finish, thickness and fabricated dimensions before ordering.
Kitchen Design Details
Plan joint locations around cabinet modules, openings, visible faces and installation access. Record the required alignment on the cutting drawing.
Specify height, length, thickness, wall condition, socket locations and joint details separately from the horizontal worktop.
Confirm the pattern direction, panel joint, edge sample and visual relationship between the horizontal top and vertical return.
Have the project fabricator or engineer confirm support requirements, especially near openings, long spans and cantilevered sections.
Procurement & Quality
We can review slab selections and published fabrication options against the dimensions and drawings supplied with an inquiry. Before final order approval, all parties should agree on component specifications, acceptance criteria and shipment arrangements.
Product code, approved colour sample, finish, slab thickness, face direction and acceptable visual variation.
Cutting schedule, cutout dimensions, edge profiles, joint details, visible surfaces and dimensional acceptance requirements.
Confirm the component list, identification, visible surface condition and packing method against the approved order.
Published countertop packing includes protective cartons, waterproof wrapping and wooden crates. The final method should match the finished shapes, transport route and order quantity.
Learn more about our factory and processing services.
Kitchen Project RFQ
A drawing-based inquiry enables more precise product selection and quotation. For multi-unit residential, hospitality or distribution orders, provide a component schedule and note which finishes and profiles are shared across the project.
Product code, preferred colour, finish and thickness.
Drawings, cutouts, edge profiles, seams and backsplashes.
Quantities, component schedule and required delivery period.
Destination country, port and packing requirements.
Kitchen Countertop FAQ
A slab is the material supplied for subsequent fabrication. A fabricated worktop is cut to the required dimensions and may include edge finishing, sink and hob openings, and additional shaped details. The agreed scope must identify which operations are included before shipment.
These thicknesses are listed on selected current countertop product pages. They are not necessarily available in every colour or finish. Confirm the exact model and thickness for your order.
Custom countertop products include configurable fabrication requirements. Please send the appliance installation drawings, countertop dimensions and required mounting details to confirm the proposed cutting scope before placing an order.
Provide the top and vertical panel dimensions, proposed mitre or joint detail, visible edge position and pattern direction. Approve the actual slab design and joint appearance before fabrication.
No. Overhang suitability also depends on the support arrangement, cutouts, span, installation details and loads. The fabricator or project engineer should approve the complete support design rather than relying on thickness alone.
Current product information includes protective cartons, waterproof plastic and wooden crates. Confirm the packing arrangement for the actual finished component dimensions, quantity and shipping destination before dispatch.
Please include the preferred model, thickness, finish, finished dimensions, drawings, edge and opening requirements, quantity, destination and required delivery period. MOQ and production arrangements can then be confirmed for that order.
We're professional sintered stone kitchen countertops manufacturers and suppliers in China, specialized in providing high quality products and service. Please feel free to wholesale customized sintered stone kitchen countertops from our factory.